|
众所周知，欧博我们常用的 Nginx / Apache 都可以很方便的用来做为正向或反向代理服务器使用。但是它们都并不支持 HTTPS 的正向代理。 Nginx 做为正向代理不支持 HTTPS 的原因是因为 Nginx 没有实现 HTTP 1.1 Connect 方法。隧道的含义大约就是帮助无法完成 TLS 握手的代理服务器透传可以完成 TLS 握手的客户端请求，而不再解析流量中的内容。 关于 Connect 和隧道技术，可详见以下文章： •RFC 2817 （） •什么是 HTTP 隧道，怎么理解 HTTP 隧道呢？ （） 今天我们来介绍一款同时支持 HTTP/HTTPS 的轻量级代理软件 TinyProxy，TinyProxy 支持以下功能特性： •支持匿名模式。•支持 HTTPS，欧博娱乐可以通过 CONNECT 请求来转发 HTTPS 连接。•远程监视：可远程查看日志和访问信息。•负载监视：可配置成当负载达到某个程度时，拒绝新的代理请求。•访问控制：可设置特定的 IP 地址或者 IP 段才可访问。•安全：不需要 root 权限。•轻量化：只需要极小的系统资源。•支持基于 URL 的过滤。•支持透明代理。•支持多级代理。 安装 TinyProxy1. 通过软件包安装 TinyProxy 目前已支持大多数发行版通过软件包安装，下面介绍下比较常用的几个平台的安装方式。 •CentOS / RHEL 代码语言：javascript 复制 # 需要 EPEL 仓库 $ yum install -y tinyproxy • Ubuntu / Debian 代码语言：javascript 复制 $ sudo apt-get -y install tinyproxy 如果你使用的是其它平台，更多的安装方式可直接参考官方文档：https://tinyproxy.github.io/ 2. 通过源码安装 如果你使用的平台，官方还不支持通过软件包安装。你也可以通过源码进行编译安装。 代码语言：javascript 复制 $ git clone https://github.com/tinyproxy/tinyproxy.git $ cd tinyproxy $ ./autogen.sh $ ./configure $ make $ make install 配置 TinyProxyTinyProxy 默认配置文件路径为 /etc/tinyproxy/tinyproxy.conf。如果你要自定义配置文件位置，欧博allbet可以在启动 TinyProxy 时 通过 -c 参数来指定。 代码语言：javascript 复制 $ cat /etc/tinyproxy/tinyproxy.conf ## ## tinyproxy.conf -- tinyproxy daemon configuration file ## ## This example tinyproxy.conf file contains example settings ## with explanations in comments. For decriptions of all ## parameters, see the tinproxy.conf(5) manual page. ## # # User/Group: This allows you to set the user and group that will be # used for tinyproxy after the initial binding to the port has been done # as the root user. Either the user or group name or the UID or GID # number may be used. # User nobody Group nobody # # Port: Specify the port which tinyproxy will listen on. Please note # that should you choose to run on a port lower than 1024 you will need # to start tinyproxy using root. # Port 8888 # # Listen: If you have multiple interfaces this allows you to bind to # only one. If this is commented out, tinyproxy will bind to all # interfaces present. # # Listen 192.168.0.1 # # Bind: This allows you to specify which interface will be used for # outgoing connections. This is useful for multi-home'd machines where # you want all traffic to appear outgoing from one particular interface. # #Bind 192.168.0.1 # # BindSame: If enabled, tinyproxy will bind the outgoing connection to the # ip address of the incoming connection. # #BindSame yes # # Timeout: The maximum number of seconds of inactivity a connection is # allowed to have before it is closed by tinyproxy. # Timeout 600 # # ErrorFile: Defines the HTML file to send when a given HTTP error # occurs. You will probably need to customize the location to your # particular install. The usual locations to check are: # /usr/local/share/tinyproxy # /usr/share/tinyproxy # /etc/tinyproxy # #ErrorFile 404 "/usr/share/tinyproxy/404.html" #ErrorFile 400 "/usr/share/tinyproxy/400.html" #ErrorFile 503 "/usr/share/tinyproxy/503.html" #ErrorFile 403 "/usr/share/tinyproxy/403.html" #ErrorFile 408 "/usr/share/tinyproxy/408.html" # # DefaultErrorFile: The HTML file that gets sent if there is no # HTML file defined with an ErrorFile keyword for the HTTP error # that has occured. # DefaultErrorFile "/usr/share/tinyproxy/default.html" # # StatHost: This configures the host name or IP address that is treated # as the stat host: Whenever a request for this host is received, # Tinyproxy will return an internal statistics page instead of # forwarding the request to that host. The default value of StatHost is # tinyproxy.stats. # #StatHost "tinyproxy.stats" # # # StatFile: The HTML file that gets sent when a request is made # for the stathost. If this file doesn't exist a basic page is # hardcoded in tinyproxy. # StatFile "/usr/share/tinyproxy/stats.html" # # LogFile: Allows you to specify the location where information should # be logged to. If you would prefer to log to syslog, then disable this # and enable the Syslog directive. These directives are mutually # exclusive. If neither Syslog nor LogFile are specified, output goes # to stdout. # LogFile "/var/log/tinyproxy/tinyproxy.log" # # Syslog: Tell tinyproxy to use syslog instead of a logfile. This # option must not be enabled if the Logfile directive is being used. # These two directives are mutually exclusive. # #Syslog On # # LogLevel: Warning # # Set the logging level. Allowed settings are: # Critical (least verbose) # Error # Warning # Notice # Connect (to log connections without Info's noise) # Info (most verbose) # # The LogLevel logs from the set level and above. For example, if the # LogLevel was set to Warning, then all log messages from Warning to # Critical would be output, but Notice and below would be suppressed. # LogLevel Info # # PidFile: Write the PID of the main tinyproxy thread to this file so it # can be used for signalling purposes. # If not specified, no pidfile will be written. # PidFile "/var/run/tinyproxy/tinyproxy.pid" # # XTinyproxy: Tell Tinyproxy to include the X-Tinyproxy header, which # contains the client's IP address. # #XTinyproxy Yes # # Upstream: # # Turns on upstream proxy support. # # The upstream rules allow you to selectively route upstream connections # based on the host/domain of the site being accessed. # # Syntax: upstream type (user:pass@)ip:port ("domain") # Or: upstream none "domain" # The parts in parens are optional. # Possible types are http, socks4, socks5, none # # For example: # # connection to test domain goes through testproxy # upstream http testproxy:8008 ".test.domain.invalid" # upstream http testproxy:8008 ".our_testbed.example.com" # upstream http testproxy:8008 "192.168.128.0/255.255.254.0" # # # upstream proxy using basic authentication # upstream http user:pass@testproxy:8008 ".test.domain.invalid" # # # no upstream proxy for internal websites and unqualified hosts # upstream none ".internal.example.com" # upstream none "" # upstream none "10.0.0.0/8" # upstream none "192.168.0.0/255.255.254.0" # upstream none "." # # # connection to these boxes go through their DMZ firewalls # upstream http cust1_firewall:8008 "testbed_for_cust1" # upstream http cust2_firewall:8008 "testbed_for_cust2" # # # default upstream is internet firewall # upstream http firewall.internal.example.com:80 # # You may also use SOCKS4/SOCKS5 upstream proxies: # upstream socks4 127.0.0.1:9050 # upstream socks5 socksproxy:1080 # # The LAST matching rule wins the route decision. As you can see, you # can use a host, or a domain: # name matches host exactly # .name matches any host in domain "name" # . matches any host with no domain (in 'empty' domain) # IP/bits matches network/mask # IP/mask matches network/mask # #Upstream http some.remote.proxy:port # # MaxClients: This is the absolute highest number of threads which will # be created. In other words, only MaxClients number of clients can be # connected at the same time. # MaxClients 100 # # MinSpareServers/MaxSpareServers: These settings set the upper and # lower limit for the number of spare servers which should be available. # # If the number of spare servers falls below MinSpareServers then new # server processes will be spawned. If the number of servers exceeds # MaxSpareServers then the extras will be killed off. # MinSpareServers 5 MaxSpareServers 20 # # StartServers: The number of servers to start initially. # StartServers 10 # # MaxRequestsPerChild: The number of connections a thread will handle # before it is killed. In practise this should be set to 0, which # disables thread reaping. If you do notice problems with memory # leakage, then set this to something like 10000. # MaxRequestsPerChild 0 # # Allow: Customization of authorization controls. If there are any # access control keywords then the default action is to DENY. Otherwise, # the default action is ALLOW. # # The order of the controls are important. All incoming connections are # tested against the controls based on order. # Allow 127.0.0.1 # BasicAuth: HTTP "Basic Authentication" for accessing the proxy. # If there are any entries specified, access is only granted for authenticated # users. #BasicAuth user password # # AddHeader: Adds the specified headers to outgoing HTTP requests that # Tinyproxy makes. Note that this option will not work for HTTPS # traffic, as Tinyproxy has no control over what headers are exchanged. # #AddHeader "X-My-Header" "Powered by Tinyproxy" # # ViaProxyName: The "Via" header is required by the HTTP RFC, but using # the real host name is a security concern. If the following directive # is enabled, the string supplied will be used as the host name in the # Via header; otherwise, the server's host name will be used. # ViaProxyName "tinyproxy" # # DisableViaHeader: When this is set to yes, Tinyproxy does NOT add # the Via header to the requests. This virtually puts Tinyproxy into # stealth mode. Note that RFC 2616 requires proxies to set the Via # header, so by enabling this option, you break compliance. # Don't disable the Via header unless you know what you are doing... # #DisableViaHeader Yes # # Filter: This allows you to specify the location of the filter file. # Filter "/etc/tinyproxy/filter" # # FilterURLs: Filter based on URLs rather than domains. # #FilterURLs On # # FilterExtended: Use POSIX Extended regular expressions rather than # basic. # #FilterExtended On # # FilterCaseSensitive: Use case sensitive regular expressions. # #FilterCaseSensitive On # # FilterDefaultDeny: Change the default policy of the filtering system. # If this directive is commented out, or is set to "No" then the default # policy is to allow everything which is not specifically denied by the # filter file. # # However, by setting this directive to "Yes" the default policy becomes # to deny everything which is _not_ specifically allowed by the filter # file. # #FilterDefaultDeny Yes # # Anonymous: If an Anonymous keyword is present, then anonymous proxying # is enabled. The headers listed are allowed through, while all others # are denied. If no Anonymous keyword is present, then all headers are # allowed through. You must include quotes around the headers. # # Most sites require cookies to be enabled for them to work correctly, so # you will need to allow Cookies through if you access those sites. # #Anonymous "Host" #Anonymous "Authorization" #Anonymous "Cookie" # # ConnectPort: This is a list of ports allowed by tinyproxy when the # CONNECT method is used. To disable the CONNECT method altogether, set # the value to 0. If no ConnectPort line is found, all ports are # allowed. # # The following two ports are used by SSL. # #ConnectPort 443 #ConnectPort 563 # # Configure one or more ReversePath directives to enable reverse proxy # support. With reverse proxying it's possible to make a number of # sites appear as if they were part of a single site. # # If you uncomment the following two directives and run tinyproxy # on your own computer at port 8888, you can access Google using # :8888/google/ and Wired News using # :8888/wired/news/. Neither will actually work # until you uncomment ReverseMagic as they use absolute linking. # #ReversePath "/google/" "" #ReversePath "/wired/" "" # # When using tinyproxy as a reverse proxy, it is STRONGLY recommended # that the normal proxy is turned off by uncommenting the next directive. # #ReverseOnly Yes # # Use a cookie to track reverse proxy mappings. If you need to reverse # proxy sites which have absolute links you must uncomment this. # #ReverseMagic Yes # # The URL that's used to access this reverse proxy. The URL is used to # rewrite HTTP redirects so that they won't escape the proxy. If you # have a chain of reverse proxies, you'll need to put the outermost # URL here (the address which the end user types into his/her browser). # # If not set then no rewriting occurs. # #ReverseBaseURL ":8888/" 下面我们来看下几个主要的配置参数： • User 指定运行 TinyProxy 的用户，默认为 nobody。 代码语言：javascript 复制 User nobody • Group 指定运行 TinyProxy 的用户组，默认为 nobody。 代码语言：javascript 复制 Group nobody • Listen 指定 TinyProxy 绑定的网卡接口，默认是绑定到所有可用的网卡接口的。 代码语言：javascript 复制 #Listen 192.168.0.1 如需绑定到指定网卡接口，只需去掉对应的注释并指定网卡对应 IP 地址即可。 代码语言：javascript 复制 Listen 192.168.1.100 • Port 指定 TinyProxy 的监听端口, 默认为 8888。 代码语言：javascript 复制 Port 8888 • Allow 指定可访问 TinyProxy 设备的 IP 或网段，欧博百家乐默认仅允许本机访问。 代码语言：javascript 复制 Allow 127.0.0.1 如果你想允许所有人使用该代理，注释 Allow 选项即可。 代码语言：javascript 复制 # Allow 127.0.0.1 如果你想增加多个可访问的网段，可以用多个 Allow 选项同时定义不同网段即可。 代码语言：javascript 复制 # 添加多段 IP 地址 Allow 10.10.6.0/24 Allow 192.168.8.0/24 Allow 172.16.1.13 •BindSame 在多网卡的情况下，设置出口 IP 是否与入口 IP 相同。默认情况下是关闭的。 例如：服务器上存在 IP 1.2.3.4，当你请求该 IP 对应的 Tinyproxy 代理时，也通过 1.2.3.4 做为出口访问目标网站。 代码语言：javascript 复制 #BindSame yes • StartServers 指定 TinyProxy 初始启动的子进程数量， 默认是 10 个。 代码语言：javascript 复制 StartServers 10 • MaxClients 设置最大客户端链接数，默认为 100。 代码语言：javascript 复制 MaxClients 100 • Logfile 指定日志文件位置, 默认为 /var/log/tinyproxy/tinyproxy.log。 代码语言：javascript 复制 LogFile /var/log/tinyproxy/tinyproxy.log • Syslog 指定 TinyProxy 是否开启 Syslog 来记录日志，默认为关闭的。 代码语言：javascript 复制 #Syslog On 注：Logfile 和 Syslog 只能同时启用一个。如果两个都不启用的话 TinyProxy 会将日志直接输出到终端的标准输出。 • PidFile 指定 Pid 文件位置, 默认为 /var/run/tinyproxy/tinyproxy.pid，在 PidFile 文件不存在时会运行失败。 代码语言：javascript 复制 PidFile "/var/run/tinyproxy/tinyproxy.pid" • DisableViaHeader 指定是否在 Header 中显示 Tinyproxy 相关信息，默认是关闭的。如果开启将不会在 Header 中显示 Tinyproxy 相关信息，相当于 Tinyproxy 是隐身模式。 代码语言：javascript 复制 #DisableViaHeader Yes • Filter 指定设置过滤内容文件的位置，默认为 /etc/tinyproxy/filter。 代码语言：javascript 复制 Filter "/etc/tinyproxy/filter" • FilterURLs 设置使用 URL 或是域名方式进行过滤，默认是基于 URL 方式过滤的。域名过滤只检查域名段，URL 过滤则检查整个 URL。 代码语言：javascript 复制 FilterURLs On • FilterExtended 设置使用 POSIX 基本或者扩展的正则表达式来匹配过滤规则，默认为使用基本的。 代码语言：javascript 复制 # FilterExtended On • FilterCaseSensitive 设置是否使用区分大小写的正则表达式，默认为不区分大小写。 代码语言：javascript 复制 #FilterCaseSensitive On • FilterDefaultDeny 设置默认过滤策略。如果将该指令注释掉或设为 No，过滤规则为禁止访问规则。该值默认为 Yes，过滤规则为只允许访问过滤文件中的地址。 代码语言：javascript 复制 FilterDefaultDeny Yes 过滤规则配置示例： 1. 在 /etc/tinyproxy/filter 文件中添加代理允许或拒绝的域名地址。 代码语言：javascript 复制 hi-linux.com 过滤文件中的域名地址也是支持正则表达式的。 代码语言：javascript 复制 \.google\.com$ ^hi-linux\.com$ 2. 仅允许代理请求 hi-linux.com 的内容，配置如下： 代码语言：javascript 复制 Filter "/etc/tinyproxy/filter" FilterURLs On FilterDefaultDeny Yes 3. 仅允许代理请求除 hi-linux.com 域名以外的内容，配置如下： 代码语言：javascript 复制 Filter "/etc/tinyproxy/filter" FilterURLs On FilterDefaultDeny No 运行 TinyProxy• 运行 TinyProxy 非常简单，使用官方提供的脚本即可。 代码语言：javascript 复制 # 启动 TinyProxy $ service tinyproxy start # 停止 TinyProxy $ service tinyproxy stop # 重启 TinyProxy $ service tinyproxy restart • 如果服务器有启用防火墙，记得开放相应的 TinyProxy 端口 代码语言：javascript 复制 $ iptables -I INPUT -p tcp –dport 8888 -j ACCEPT • 测试代理是否正常工作 代码语言：javascript 复制 $ curl --proxy 192.168.1.100:8888 -k https://www.hi-linux.com/ 如果出现对应网页的源代码，则证明代理工作正常。 • 查看 TinyProxy 请求日志 代码语言：javascript 复制 $ tail -f /var/log/tinyproxy/tinyproxy.log (责任编辑：) |
