M99 plus Integrate Tube Amplifier

The fifth anniversary model, with volume and input selector. Due to reasonable input sensitivity, can be connected direct to CD source. If connected using the T99 pre-amplifier the sonic result will be even better. The circuit composes of there stages: Sovtek 12AX7LPS (ECC83) as the first SRPP stage, followed by Shuguang 6N8P (6SN7) driver stage with Shuguang 6P3P (6L6GC/KT66/5881) as the final power stage in class push pull class AB configuration. This is a classical circuit and the sonic performance is very high due to the design of the output transformer, tube circuit optimization and years of experience in the development of the M100SE. Uses fixed bias design with external individual bias adjustment for each 6P3P.

Specifications:

CONTROL FUNCTIONS: Volume, Select, Power On/Off
POWER OUTPUT: 20 watt, RMS 1kHz
TOTAL HARMONIC DISTORTION: less than 1%(10watt, 1kHz)
FREQUENCY RESPONSE: (-3dB points at 10 watt) 6Hz-60kHz
INPUT SENSITIVITY: 160mV
INPUT IMPEDANCE: 100k ohms
OUTPUT IMPEDANCE: 4 , 8 ohms. User selectable.
SIGNAL/NOISE: 90dB
CONSUMPTION: 90watt
INPUT INTERFACES: 3 groups (RCA) - ( 1,2,3 on the rear panel )
OVERALL NEGATIVE FEEDBACK: Little (-6dB)
VACUUM TUBE: 6P3P/6L6GC x 4,6SN7 x 2,12AX7 x 2
DIMENSIONS: 446(L) x 264(W) x 155(H) mm
WEIGHT: 20.5kg

Inputs: CD, Aux and Line in